Amps
[Top] [All Lists]

[AMPS] Need HV insulators/feedthru

To: <amps@contesting.com>
Subject: [AMPS] Need HV insulators/feedthru
From: measures@vc.net (Rich Measures)
Date: Mon, 8 Dec 97 19:15:14 -0800
>Hi ALL,
>  I am looking for a good HV connector to bring HV thru a metal plate.
>I have used the Millen HV connectors rated for 5 kv, which pops with
>5500 on them. 

Millen HV connectors suck -- i.e., they are made of phenolic resin -- 
which is hygroscopic, so the connector insulation literally sucks 
moisture out of the air.  
-  I use a banana plug and a banana jack.  The plug goes on the end of 
15kV-rated silicone rubber wire.  The banana jack mounts in the center of 
a 3" square of 0.125" g-10.  It's good for 15A.  
Rich...

R. L. Measures, 805-386-3734, AG6K   


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>