To: <amps@contesting.com>
>> Date: Wed, 27 May 1998 10:36:12 -0400 (EDT)
>> From: km1h@juno.com
>> Subject: Re: [AMPS] More amplifier experiments
>> To: amps@contesting.com
>
>> I seem to recollect suggesting the new 5W metal oxide resistors from
>> Mouser more than once Jon.
>> They are cheap and you can buy several values to experiment.
>> Are they inductive....not that I can measure on either a hand held LCR
>> meter or an old Tektronix 130 LC Meter. My HP-4271B has died. In any
>> event they seem to function fine in suppressor circuits up thru 50MHz.
>
>The 5 watt metal oxide resistors I have sampled from Mouser are very
>inductive.
Which values had how much inductance?
>Not only that, you have NO control over who's resistors
>they send you.
>
>If anyone knows of a non-inductive 5 watt standard off the shelf
>resistor let me know....I've been looking for one for years.
As surely as the sun rises in the East and sets in the West, you will
never find a non-inductive resistor, Mr. Rauch.
>Cut one open and look at it.
>
Cutting the aluminum-oxide rod won't get it. Scraping the paint off
will.
Rich...
R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|