>I haven't had a chance to tune up to see any difference yet.
>If arcing still occurs, and if it is possibly parasitics
>at 110MHz as Rich comments, what can be done?
If the supressor resistors are OK, then my bet is that they are working
fine and you don't have parasitics. You already have nichrome wires in
there so adding Rich's wouldn't do anything for you.
Carl, KM1H, suggested removing all of the mods you did and seeing how it
works. Perhaps something is amiss with them. If something is not
assembled correctly on the input circuitry, you could be creating an
instability there as well. This is probably not a bad idea. Then
reinstall the mods one at a time and try to determine where the problem
occured.
Hope this helps.
73,
Jon
KE9NA
--------------------------------------------------------------------------
Jon Ogden
jono@enteract.com
www.qsl.net/ke9na
"A life lived in fear is a life half lived."
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|