On Thu, 29 Oct 1998 10:43:32 -0800 Rich Measures <measures@vc.net>
writes:
>
>>
>> Thanks for the info on why not to use ferrites for plate chokes.
>>I've found an inexpensive source($.65 each) of FB43-1020's(1 1/8" x
>1"
>>x 1/2") that I've been playing around with as baluns.
>
>Just for fun, try taking a look at what the Manufacturer (not the
>distributor) gives as the max freq. rating for this material in
>transformer service.
However other Fairite mixes such as the -61 and -63 can work quite well
at HF once the limits are understood.
A R61-50-400 ( old Radiokit part # but I have several hundred available)
can be the core...pun intended...for a 5KW CCS 2-30MHz plate choke.
73 Carl KM1H
___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|