>
>I have just completed several homebrew chokes, the question is what is
>the most effective way to use a dip meter to check these chokes for
>resonance.
I couple the dipmeter coil to the side of the hv rfc, about in the middle
of the winding. note - Checking above 33Mhz is of no importance in an HF
amplifier. .
Rich...
R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|