Will,
Me thinks Icom is feeding you a line, (as Rich would say) of sliced
bologna. A friend of mine had a -706 that he wished to amplify for 6 and
two meters. He found the same problem and eventually opted for using a
TS-830 and down/up converters. Maybe on some models they did fix it but some
of the other folks around here would argue differently.
FWIW,
Mike(y)
W3SLK
----- Original Message -----
From: Will Angenent <k6ndv@contesting.com>
To: paul <apollo_six@btinternet.com>; <amps@contesting.com>
Sent: Wednesday, January 03, 2001 8:59 PM
Subject: RE: [AMPS] Output Pulse from ICOM 706
According to Icom this is BOGUS! they had my 706 2 times and they can't find
the problem, They replaced my 775DSP thou (for the same reason)
73 Will, K6NDV
-----Original Message-----
From: owner-amps@contesting.com [mailto:owner-amps@contesting.com]On
Behalf Of paul
Sent: Wednesday, January 03, 2001 2:49 PM
To: amps@contesting.com
Subject: [AMPS] Output Pulse from ICOM 706
Has anyone come up with a solution to the problem of the large pulse
produced from an ICOM 706 when initially keyed and even with the power
output turned down?
I'd like to use mine with a grid driven linear but apart attenuating the
output of the 706 on full 100 watts output unless there's a fix then it
doesn't seem possible.
Paul
--
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|