At 02:03 PM 2/2/01, Jeff Wolf wrote:
>
>The SB220 should ALWAYS be started in the CW position to limit inrush
>current. NEVER start the SB220 in the SSB position, as it puts too much
>strain on components.
>
Never heard this before. I never do it this way. Don't think it's really
a problem.
But I do agree, the best cosmetic and operational solution is to use the
push-pull switch on the sensitivity pot.
73, Pete N4ZR
Contesting is!
The World Contest Station Database
is waiting for your input at
http://www.qsl.net/n4zr
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|