Amps
[Top] [All Lists]

[AMPS] Another Stupid Question

To: <amps@contesting.com>
Subject: [AMPS] Another Stupid Question
From: jstrohm@texas.net (Jim Strohm)
Date: Thu, 29 Nov 2001 18:34:24 -0600
Check the math -- 1% is 20 watts on a 2 KW amp -- a real doorknob cap would
be fine.  However, as Mr. Measures pointed out, current at 30 MHz can be
considerable, and I^2R effects will push losses up.

I think that's why RF Parts and Copper Electronics charge so much for
replacement plate blocking caps.  That get re-replaced every year....

Since I have a decent sized dummy load and some expendable finals, I might
try some experiments with low-pF blocking caps.  I would be suitably
surprised (and delighted) to find that an ARC-5 antenna vacuum cap would
work in place of a $50. doorknob cap at 30 MHz and a kilowatt.

Jim N6OTQ

"Tom Rauch" <w8ji@akorn.net> said --

>If you lost even 1% of the power output in the blocking cap, it would
>explode, melt, sag, or turn to smoke.
>
>One of the biggest myths around is that blocking caps noticeably
>affect efficiency.




--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>