Amps
[Top] [All Lists]

[AMPS] Chassis for HB Amps

To: <amps@contesting.com>
Subject: [AMPS] Chassis for HB Amps
From: watson@sierracmp.com (George K. Watson)
Date: Wed, 2 Jan 2002 17:09:05 -0700
>> Are these the kind with a cutter that slides on a bar?  How thick can the
>> aluminum be?  What speed do you need to set the drill press at?
It is that kind of cutter. I don't remember the thickness limit. As for
drill
press speed, they say 400rpm. Mine bottoms out at 600rpm, but seems to work.
I am extremely careful and patient with it and it produces very nice results
as long as you clamp well and don't push it.

SAFETY GOGGLES... The biggest amplifier you could ever put on the air is not
worth your
vision.

George K. Watson
K0IW




--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>