| To: | aa6eg@hotmail.com, K1LE@ARRL.NET, amps@contesting.com |
|---|---|
| Subject: | Re: [Amps] L-7 Failure, HV fuses |
| From: | peter.chadwick@Zarlink.Com |
| Date: | Mon, 17 Nov 2003 08:54:34 +0000 |
| List-post: | <mailto:amps@contesting.com> |
Pat said; >I have seen in the literature descriptions of a HV fuse made by inserting >into the B+ line, a 30 guage Cu wire approx 2" long. suspended between >two ceramic standoffs in the amp. 30 gauge might be a bit on the thick side. I successfully use 40 SWG. 73 Peter G3RZP _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [Amps] More Eimac Info + some web data wanted., Mike Hyder --N4NT-- |
|---|---|
| Next by Date: | RE: [Amps] Benefits of 3-phase power?, peter . chadwick |
| Previous by Thread: | Re: [Amps] L-7 Failure, HV fuses, Jeffrey Madore |
| Next by Thread: | [Amps] Bleeder Resistor Qusetion, Steve |
| Indexes: | [Date] [Thread] [Top] [All Lists] |