Re: [Amps] Panasonic tube radio

[Jim Isbell <millenniumfalcon@cableone.net>]

In the late 50s when I started, almost everything was home brew or 
modified Surplus.  If you had commercial gear it was because you were 
either wealthy or had a wealthy ham friend who was upgrading and liked 
you a lot.  My first commercial gear was an NE-6 (12 watts on 6 meters) 
transmitter that a good friend gave me because he felt sorry for me with 
a ticket and no gear.  I then homebrewed (from scratch) a converter for 
the car radio to put 50.0 to 51.0 on the car broadcast band.

Bill Turner wrote:

> On Sun, 12 Sep 2004 10:26:48 +0200, peter.chadwick@Zarlink.Com wrote:
>
>  
>
> > I find the older ones (1946 to about 1965)even more interesting. As a 
> > percentage, did many more people build their rigs rather than buy? Kits 
> > were perhaps more available, which skews the numbers a bit, I suppose.
> >    
>
> _________________________________________________________
>
> When I got into ham radio in the late '50s it was more common for
> transmitters to be homebrewed than bought, especially if you include
> kits as "homebrewed".  Thinking back on all my friends from those
> days, not one had a commercially made transmitter.
>
> Receivers were a different matter.  Nearly all were commercial or
> modified war surplus, which there was a ton of back then.
>
> Ahhhhh... the good ol' days.  :-) 
>
> --
> 73, Bill W6WRT
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>  


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps