Amps
[Top] [All Lists]

Re: [Amps] Hipersil, the myth and the truth. (Updated)

To: "'G3rzp@aol.com'" <G3rzp@aol.com>, craxd1@ezwv.com,amps@contesting.com
Subject: Re: [Amps] Hipersil, the myth and the truth. (Updated)
From: "Carcia, Francis A HS" <francis.carcia@hs.utc.com>
Date: Mon, 18 Apr 2005 14:11:32 -0400
List-post: <mailto:amps@contesting.com>
Remember a lot of the mil stuff in the air is running at 400 Hz. Also the
environmental
testing may have been harder to pass with EI transformers. Maybe C cores
don't need to be potted to pas humidity tests. How about vibration testing
with a core having many layers
floating on 4 studs? gfz 


-----Original Message-----
From: G3rzp@aol.com [mailto:G3rzp@aol.com]
Sent: Monday, April 18, 2005 2:05 PM
To: craxd1@ezwv.com; amps@contesting.com
Subject: Re: [Amps] Hipersil, the myth and the truth. (Updated)


Will,
 
Can you think of a reason why, at least over here, the military especially  
seemed for many years to go for C cores rather than the conventional E and
I?
 
C cored transformers were always more expensive, and I'm told that a lot of

mil gear was bought scrap for the transformers - saw up the windings,
retrieve 
 the copper, and carefully keep and resell the pairs of C cores.
 
Come a long way froma bundle of iron wires dipped in varnish to make your  
own intervalve audio transformer!
 
73
 
Peter G3RZP
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>