Hello,
I agree with Mark as Ian's Tetrode Boards have saved my tube (4CX1600B)
many times due to operator error.
At 11:56 7/11/05, Mark Marsden wrote:
>
>That's one way but it certainly isn't the safest. For tubes without
>handles check out the Tetrode Boards
>on http://www.ifwtech.co.uk/g3sek/boards/tetrode/tetrode-1.htm
>
>73 Mark G4AXX
>
>-----Original Message-----
>From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
>Behalf Of Phil Clements
>Sent: 11 July 2005 16:29
>To: 'PA3DUV'; amps@contesting.com
>Subject: Re: [Amps] Tetrodes
>
>Subject: Re: [Amps] Tetrodes
>
> > For small tetrodes, the safest way to power the screen is through a...
>
>What is "small"?
>
>73, Dick Knol
>PA3DUV
>
>Tubes that do not have built-in handles are small; to me anyway.....
>
>(((73)))
>Phil, K5PC
>
>
>
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
73,
Mike, K4GMH
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|