ORIGINAL MESSAGE:
At 08:01 AM 2/27/2006, Robert Dorchuck W6VY wrote:
>The band data uses a special 8 pin DIN plug - spacing is different
>than the standard. The arc is 262 degrees.
>
>They are available at:
>
>http://users.erols.com/rfc/dinconn.htm
>
>It is the DB8/262 - it says Kenwood but it is the only one that
>fits the band data on the FT-1000MP.
>
>The only ones I have seen on Mouser are the 270 degree arc ones.
>
>Bob W6VY
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I stand corrected on the band data connector. On my FT-1000MP I only
used the ACC connector and that is a standard 8-pin, common as dirt.
73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|