Re the resistor thread:
How can one see/read/find out as to how low the inductance of a particular
resistor might be?
Am not trying to open a can of worms here, am well aware that as a resistor
heats up its inductance changes, but... ? Larger wattage values= less
inductance to what might be referred to as the "point of diminishing
returns?"
No flaming please, yes, I should know the answer to this one but I do not.
That is why I am asking.
73,
Gary...wa6fgi
----- Original Message -----
From: "Will Matney" <craxd1@verizon.net>
To: <amps@contesting.com>
Sent: Tuesday, March 28, 2006 4:21 PM
Subject: Re: [Amps] Need some 220K 2 watt carbon resistors
>I knew that was coming, been caught saying it myself : )
>
> Will
>
> *********** REPLY SEPARATOR ***********
>
> On 3/28/06 at 4:17 PM R@contesting.com;Measures wrote:
>
>>On Mar 28, 2006, at 12:00 PM, Ian White GM3SEK wrote:
>>
>>> Mike McCarthy, W1NR wrote:
>>>> Ohmite OX and OY series ceramic composition resistors can be used as
>>>> replacements for carbons. They are non inductive unlike film and
>>>> wirewound resistors. Available at Mouser, Digi-key, etc.
>>>>
>>>> See http://www.ohmite.com/cgi-bin/showpage.cgi?product=ox_oy_series
>>>>
>>>> Mike, W1NR
>>>
>>> Where do Ohmite specify the inductance of these resistors, or show how
>>> they are made?
>>
>>There is no such thing as a non-inductive resistor.
>>>
>>>
>>> ...
>>
>>
>>
>>Rich Measures, 805.386.3734, AG6K, www.somis.org
>>
>>_______________________________________________
>>Amps mailing list
>>Amps@contesting.com
>>http://lists.contesting.com/mailman/listinfo/amps
>
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|