I have learned a lot from posts to this Reflector, and I hope to continue to do
so.
I cannot fathom why posts about tests and measurements do not belong here. But
if they don't, then neither do I.
Regards,
Ed
W2ED
-----Original Message-----
>From: Administrator <amps@myrealbox.com>
>Sent: Apr 23, 2006 8:44 PM
>To: craxd1@verizon.net, amps@contesting.com
>Subject: Re: [Amps] Cal Lab
>
>
>Gentlemen,
>
>This is *NOT* the "test and measurement forum." Please confine the
>topics here to amplifier related issues. Calibration standards, old
>test equipment and hand tools do not belong here ...
>
>Those who continue to push the limits will be unsubscribed without
>further warning.
>
>73,
>
> ... Administrator,
> amps@contesting.com
>
>
>> -----Original Message-----
>> From: amps-bounces@contesting.com
>> [mailto:amps-bounces@contesting.com] On Behalf Of Will Matney
>> Sent: Sunday, April 23, 2006 4:45 PM
>> To: amps@contesting.com
>> Subject: Re: [Amps] Cal Lab
>>
>>
>> All,
>>
>> On those 0.01% resistors, I've been quoted anywhere from
>> $15.11 to $22.00 each. That's why I said I'd like to find
>> some at $7.00. Below are the $15.11 resistors webpage link at Newark.
>>
>> http://www.newark.com/NewarkWebCommerce/newark/en_US/endecaSea
>> rch/partDetail.jsp?SKU=35H5064&N=0
>>
>> Best,
>>
>> Will
>>
>
>
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|