> Kevin Adam wrote:
> > Wanted information on adding a second tube to AL 1200 has anyone done
> > this if so can you give the details as to what all is envoled what
> > parts you had to change if any please help
>
> Off the top of my head, you would probably need an outboard power
> supply, since it's doubtful that a larger transformer would fit. Then
> you'd need to change the input network components for half the
> impedance
A 2:1 unun transformer will work fine here; just like the ones Alpha
supplied with their 77DX to SX conversion kit.
> Ameritron is known for borderline tank
> inductors, so you might have to replace the coils with ones made of
> larger wire or tubing to handle the RF current.
That is an understatement! Under-sized wire compounded by small winding
diameter.
> Why don't you just build a new one?
I learned a long time ago that selecting a single tube to meet your desired
specifications makes life much simpler. The initial cost may be higher, but
a proper tube with a lot of headroom will last a ham a lifetime. If I were
to mod an AL-1200, I would change to a single 1200Z7 and call it a day.
(((73)))
Phil Clements, K5PC
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|