To: | Vic K2VCO <vic@rakefet.com> |
---|---|
Subject: | Re: [Amps] Henry 8K |
From: | "Kenneth D. Grimm, K4XL" <kgrimm@adelphia.net> |
Date: | Wed, 17 May 2006 16:23:16 -0400 |
List-post: | <mailto:amps@contesting.com> |
Vic K2VCO wrote: >R L Measures wrote: > > > >>Is it easier to put up a 10-element Yagi-Uda beam for 160m or to >>build a 20db amplifier? >> >> > >Who will work more DX on 160? The guy with 1500 watts, a 4-square and >Beverages (and I don't mean 'adult beverages') or the guy with 10KW and >a vertical monopole? > >I wish I had the antennas to make this bet! > > Don't you suppose that the guy who goes to the trouble and expense to build a 10KW amp to work DX on 160 is also going to put a little effort into his receiving antennas? The way you set it up is a sucker bet! :-) -- Ken K4XL k4xl@arrl.net *** BoatAnchor Manual Archive *** On the web at http://bama.sbc.edu and http://bama.edebris.com FTP site info: bama.sbc.edu login: anonymous p/w: youremailadr _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [Amps] adding second tube to AL1200, Vic K2VCO |
---|---|
Next by Date: | Re: [Amps] adding second tube to AL1200, Phil Clements |
Previous by Thread: | Re: [Amps] Henry 8K, bob finger |
Next by Thread: | Re: [Amps] Henry 8K, Phil Clements |
Indexes: | [Date] [Thread] [Top] [All Lists] |