| To: | "'R L Measures'" <r@somis.org>, <amps@contesting.com> |
|---|---|
| Subject: | Re: [Amps] Maximum RF output in practical application: 4-250A |
| From: | "Joe Subich, W4TV" <w4tv@subich.com> |
| Date: | Mon, 3 Jul 2006 11:02:22 -0400 |
| List-post: | <mailto:amps@contesting.com> |
Rich writes: > With a 3kHz limit, AM would be virtually banned. Should AM > have 2x the limit of SSB? Banning DSB full carrier AM sounds like a good idea to me. If someone wants "AM compatibility" ISB with reduced carrier will do the job just fine. There is no justification for a bandwidth greater than 3 KHz at -6 dB and 5 KHz at -40 dB in communications service ... after all amateur radio is not a high fidelity broadcast service. 73, ... Joe, W4TV _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
| Previous by Date: | Re: [Amps] Safety grounding - was Mains Isolation Transformer, Peter Chadwick |
|---|---|
| Next by Date: | Re: [Amps] Maximum RF output in practical application: 4-250A, Administrator |
| Previous by Thread: | Re: [Amps] Maximum RF output in practical application: 4-250A, R L Measures |
| Next by Thread: | Re: [Amps] Maximum RF output in practical application: 4-250A, Joe Isabella |
| Indexes: | [Date] [Thread] [Top] [All Lists] |