Amps
[Top] [All Lists]

Re: [Amps] I need transfer switch information

To: <Gudguyham@aol.com>, <kenw2dtc@comcast.net>, <amps@contesting.com>
Subject: Re: [Amps] I need transfer switch information
From: "Carl" <km1h@jeremy.mv.com>
Date: Mon, 10 Aug 2009 12:51:29 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
I use a standard rotary transfer switch at the generator panel which is next 
to the main one.

Carl
KM1H


----- Original Message ----- 
From: <Gudguyham@aol.com>
To: <kenw2dtc@comcast.net>; <amps@contesting.com>
Sent: Monday, August 10, 2009 8:10 AM
Subject: Re: [Amps] I need transfer switch information


>
> In a message dated 8/10/2009 1:37:51 A.M. Eastern Daylight Time,
> kenw2dtc@comcast.net writes:
>
> I would  like to switch out two circuits from my main panel to an 
> emergency
> generator  with a manual transfer switch or a contactor.  I've sketched 
> out
> a  circuit that will do this even when the main panel is live and I will
> need a  3PDT switch.
>
>
>
> You only switch hots so you only need a DPDT switch.  Should not  switch
> neutrals
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>