ORIGINAL MESSAGE:
On Fri, 19 Mar 2010 22:40:09 -0400, "Gary Schafer"
<garyschafer@comcast.net> wrote:
>
>When you mount your padder caps below the chassis you run a wire thru the
>chassis to connect to the hot side of them. The return current follows back
>thru the hole where the wire came thru.
REPLY:
That's a pretty inventive theory, but I still maintain that RF takes
the shortest path. If it can go directly through a chassis at 90
degrees it will, vs taking the long way around.
73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|