Amps
[Top] [All Lists]

Re: [Amps] CB amp directly coupled via cap to antenna

To: "Phil Clements" <philc@texascellnet.com>, <amps@contesting.com>
Subject: Re: [Amps] CB amp directly coupled via cap to antenna
From: "Carl" <km1h@jeremy.mv.com>
Date: Thu, 8 Apr 2010 18:22:07 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Yes he did Phil, he had Eimac create a water cooled tetrode or him.

Also a KW amp with a transformerless PS.

And phased 75M verticals on his old Packard convertible in the 50's.

He was rather creative to say the least but he had the money to play with.

Carl
KM1H


----- Original Message ----- 
From: "Phil Clements" <philc@texascellnet.com>
To: <amps@contesting.com>
Sent: Thursday, April 08, 2010 4:19 PM
Subject: Re: [Amps] CB amp directly coupled via cap to antenna


>
>
>> Jo Jennings built an amp in the 60's that ran a mess of sweep tubes at 
>> 2KW
>> PEP input. The output tank was a .01 cap. It was even published in QST.
>>
>> Carl
>> KM1H
> Did he not also build and publish a mobile amplifier using ceramic tubes
> that was built into the antenna?
>
> Phil, K5PC
>
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>