The idea here is to have a stand alone HF system for Emcomm until I can get
the genset running... Which I played with after Hurricane IKE. Lots of
lessons learned...
Given,
- a 500W SGC Cube
- Two AGM 6V Golf Cart batteries (will add two more later in parallel/series)
- an IntelliPower 9280 PS
- #4AWG zipcord for powerline with 75a fuses.
I want to hook the above together creating a deep cycle AGM 12V battery pack
with about 200ah capacity. (the second pack will double that)
I am thinking about adding a one or two Farad capacitor in line between the
batteries and the amp. The only thing I am not sure about is whether the PS
will charge that many batteries, etc.
Has anyone ever built a power supply system with a capacitor??
what suggestions for doing it right?
any url for a source on such an installation?
Anything else need to be added like a low voltage cutoff, isolator, etc?
thanks in advance
chas k5dam
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|