Carl wrote:
>> ## I have used Amphenol PL-259's that were a bitch to solder the braid
>> to..
>> through those 4 x little holes. Think they were nickel plated. The
>> best types
>> appear to be Silver plated ones..with teflon dielectric. I bought a bunch
>> of Van-
>> Gordon PL-259's..and those are silver plated, including the outer shell.
>> Teflon
>> dielectric in the middle..and real easy to solder.
>
>
>** Tin the nickel ones first. I do a batch at a time of NOS Amphenols I
>picked up back in the R-K days with a solder pot. Flux up, dip in pot
>and bang hard to remove excess.
Another trick is to file across each of the 4 holes with a 1/8in round
file. File away to almost the full depth of the hole, leaving just a
thin feather-edge of bare brass which is much easier to solder.
--
73 from Ian GM3SEK
http://www.ifwtech.co.uk/g3sek
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|