Re: [Amps] Power handling of an SMA

[donroden@hiwaay.net]

Quoting Ian White GM3SEK <gm3sek@ifwtech.co.uk>:
> Another trick is to file across each of the 4 holes with a 1/8in round
> file. File away to almost the full depth of the hole, leaving just a
> thin feather-edge of bare brass which is much easier to solder.


I drill out the holes to a larger size.

I also pre-tin the braid and then I cut the braid with a razor knife.

Don W4DNR
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps