Amps
[Top] [All Lists]

Re: [Amps] Source for plate xfrmer

To: km1h@jeremy.mv.com, ranchorobbo@gmail.com, steve@dx4win.com
Subject: Re: [Amps] Source for plate xfrmer
From: TexasRF@aol.com
Date: Tue, 14 Feb 2012 10:54:42 -0500 (EST)
List-post: <amps@contesting.com">mailto:amps@contesting.com>
I guess there is some electrical code that forbids connecting the 120vac  
blower between one side of the 240ac line and neutral?
 
I hope this doesn't start another round of ground vs neutral wiring  sins.
 
73,
Gerald K5GW
 
 
 
 
 
 
 
In a message dated 2/14/2012 9:41:22 A.M. Central Standard Time,  
km1h@jeremy.mv.com writes:

You can  get more benefit with primary taps and not bothering with a pair 
of 
120V  windings; use a seperate 120V line for blowers, LV supplies,  etc.

Tapping the secondary limits your KVA as you go to lower voltages  and who 
the heck needs a CT in a big  amp?

Carl
KM1H


----- Original Message ----- 
From:  "Rob Atkinson" <ranchorobbo@gmail.com>
To: "Steve Bookout"  <steve@dx4win.com>
Cc: <amps@contesting.com>
Sent: Monday,  February 13, 2012 10:10 PM
Subject: Re: [Amps] Source for plate  xfrmer


> In addition EPD makes a good product but plan on  spending at least
> $400, perhaps more.
>
>  http://epd-inc.com/
>
> How much are you prepared to  spend?   Because of the price of copper
> any custom plate  iron you get that has some muscle is going to
> probably cost some  coin.  More if you want it potted and several taps.
> Even if you  don't need them if you are paying for a custom job it's a
> good idea to  get a CT on the secondary and of course one on the
> primary, plus a few  more taps on the secondary.   You may decide 4.25
> KV DC with  a cap input filter is a bit high, or if not, extra taps
> afford  different supply voltages and increase the versatility of the
>  transformer and its resale value if you ever decide to let it  go.
>
> 73
>
> Rob
> K5UJ
>
> On  Mon, Feb 13, 2012 at 12:35 PM, Steve Bookout <steve@dx4win.com>  
wrote:
>> Hello all,
>>
>> Where do you look for a  new HV plate transformer these days?
>>
>> I understand  Peter Dahl is no longer around.
>>
>> I'm looking for 3000  VAC secondary @ 1+ amp CCS.
>>
>>  TIA
>>
>> 73 de Steve, NR4M
>  _______________________________________________
> Amps mailing  list
> Amps@contesting.com
>  http://lists.contesting.com/mailman/listinfo/amps
>
>
>  -----
> No virus found in this message.
> Checked by AVG -  www.avg.com
> Version: 10.0.1424 / Virus Database: 2112/4808 - Release  Date: 02/13/12
>  

_______________________________________________
Amps mailing  list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>