Amps
[Top] [All Lists]

Re: [Amps] April QST article on RF power tube test stand

To: <amps@contesting.com>
Subject: Re: [Amps] April QST article on RF power tube test stand
From: "Cliff K3LL" <K3LL@EEContent.com>
Date: Sun, 18 Mar 2012 12:38:57 -0700
List-post: <amps@contesting.com">mailto:amps@contesting.com>
http://lists.contesting.com/archives/html/Amps/

or for a more snarky response....

http://lmgtfy.com/?q=amps+mailing+list+archive

73,

Cliff K3LL


-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of Stephen Colello
Sent: Sunday, March 18, 2012 12:16 PM
To: Carl; Robert Groh; amps@contesting.com
Subject: Re: [Amps] April QST article on RF power tube test stand

Please, how do you get to the archives?

Steve  KA2KON

----- Original Message ----- 
From: "Carl" <km1h@jeremy.mv.com>
To: "Robert Groh" <rgroh@swbell.net>; <amps@contesting.com>
Sent: Sunday, March 18, 2012 1:02 PM
Subject: Re: [Amps] April QST article on RF power tube test stand


> Ive outlined the steps several times on here under gettering, see the 
> archives.
>
> Carl
> KM1H
>
>
>  ----- Original Message ----- 
>  From: Robert Groh
>  To: Carl ; amps@contesting.com
>  Sent: Sunday, March 18, 2012 11:38 AM
>  Subject: Re: [Amps] April QST article on RF power tube test stand
>
>
>  Carl,
>
>  I would be very interested in your ideas on what should be added.  My 
> opinion was also that it was a bit limited (keeping in mind my absolute 
> beginner status in high power amps) and could stand a few additions such 
> as easy provision for running lower plate voltage for gettering, some way 
> to test emission, etc.  Also still needs some way to hipot the tube but I 
> guess that is best handled with a separate hipot test setup.
>
>  In any event, I would be most eager to hear your ideas.
>
>  73
>  Bob, WA2CKY
>
>
>
>
>
----------------------------------------------------------------------------
--
>  From: Carl <km1h@jeremy.mv.com>
>  To: Rob Atkinson <ranchorobbo@gmail.com>; amps@contesting.com
>  Sent: Sun, March 18, 2012 10:30:24 AM
>  Subject: Re: [Amps] April QST article on RF power tube test stand
>
>  Its a mostly waste of time as built. A little more work and it could be
>  useful to do emissions tests as well as proper (safe) gettering.
>
>  Carl
>  KM1H
>
>
>
>
----------------------------------------------------------------------------
--
>
>  No virus found in this message.
>  Checked by AVG - www.avg.com
>  Version: 10.0.1424 / Virus Database: 2113/4878 - Release Date: 03/18/12
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps




_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>