See the latest ARRL handbooks for the 3CX1500 amplifier by Jerry K8RA. He
uses toroids for 80 and 160.
73
Jim W7RY
--------------------------------------------------
From: "Roy" <royanjoy@ncn.net>
Sent: Saturday, March 24, 2012 1:17 PM
To: <Amps@contesting.com>
Subject: Re: [Amps] Guidelines.....toroids for tank ckts
> 'T'was asked,
>
> "I'm looking at alternatives to rebuild a tank circuit in a 1.5kw HF amp.
> I'm interested in using toroids rather than air-core coils and with that,
> a
> different (non-tapped, separate coil for each band) switching scheme. I've
> seen (2" T-200 series) toroid cores used in 80/160 sections of Alpha 76
> series and have heard they're used elsewhere, but I don't know what I
> should
> consider in a homebrew application, other than dielectric tape to prevent
> arcing through the core. Does anyone have any references or other info I
> could look up?"
>
> Tks,
>
> 73 Dave WB0GAZ
>
> Hi Dave,
>
> I use a 4" by 1 1/4" T-400 powered iron core as L-1 in my 160-meter
> Pi-L tank along with a stacked pair of two T-200 as L-2. Runs cool at
> 1500
> watts CW all day. I use the HV glass tape recommended by Amidon and others
> to wrap the cores with.
>
> 73, Roy K6XK Iowa
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|