Amps
[Top] [All Lists]

Re: [Amps] Guidelines.....toroids for tank ckts

To: amps@contesting.com
Subject: Re: [Amps] Guidelines.....toroids for tank ckts
From: Gary K9GS <garyk9gs@wi.rr.com>
Reply-to: garyk9gs@wi.rr.com
Date: Sun, 25 Mar 2012 13:45:41 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com>
I wonder what the permeability is of a jelly filled donut?

Did the bagel toast or just get stale?

On 3/25/2012 11:31 AM, Colin Lamb wrote:
> Toroids do not need to be wound on powdered iron or ferrite.  A core with no 
> permeability works.  The advantage of such a core is the self-contained 
> energy.  You can wind a core on teflon or some other material.  The 
> disadvantage is that more wire is needed.
>
> A number of years ago, I made an antenna tuner for field day and wound the 
> coil on a bagel.  It worked fine and got people's attention. Much easier to 
> wind on week old bagels.
>
> That may have been the same year my final was a 5U4G.
>
> 73,  Colin  K7FM
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>

-- 


73,

Gary K9GS

Greater Milwaukee DX Association: http://www.gmdxa.org
Society of Midwest Contesters: http://www.w9smc.com
CW Ops #1032   http://www.cwops.org

************************************************

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>