Amps
[Top] [All Lists]

Re: [Amps] Tubes vs. Solid State

To: amps@contesting.com
Subject: Re: [Amps] Tubes vs. Solid State
From: Bob Henderson <bob@5b4agn.net>
Date: Fri, 4 May 2012 10:41:16 +0000
List-post: <amps@contesting.com">mailto:amps@contesting.com>
No that is definitely not the case.

Bob, 5B4AGN

On 4 May 2012 10:33, Alex Eban <alexeban@gmail.com> wrote:

> Guys, what you describe here is transformer saturation! Most likely using
> too small core.
> Alex 4Z5KS
>
> -----Original Message-----
> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
> Behalf Of Manfred Mornhinweg
> Sent: Friday, May 04, 2012 5:22 AM
> To: amps@contesting.com
> Subject: Re: [Amps] Tubes vs. Solid State
>
> Bob,
>
> > My problem area was the extent of harmonics generated within the
> > device.  H3 was within a dB or two of fundamental energy levels and
> > H5 only marginally better.
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>