[Amps] Tubes vs. Solid State

Amps

[Amps] Tubes vs. Solid State

To:	<amps@contesting.com>
Subject:	[Amps] Tubes vs. Solid State
From:	"Jim Thomson" <jim.thom@telus.net>
Date:	Fri, 4 May 2012 04:05:02 -0700
List-post:	<amps@contesting.com">mailto:amps@contesting.com>

Date: Fri, 4 May 2012 13:33:07 +0300
From: "Alex Eban" <alexeban@gmail.com>
Subject: Re: [Amps] Tubes vs. Solid State

Guys, what you describe here is transformer saturation! Most likely using
too small core.
Alex 4Z5KS

##  I doubt it.  It will overheat long before it saturates. 

Jim  VE7RF

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
Re: [Amps] LDMOS Solid State Amplifiers, (continued) Re: [Amps] LDMOS Solid State Amplifiers, Roger (K8RI) Re: [Amps] LDMOS Solid State Amplifiers, Gary Schafer Re: [Amps] LDMOS Solid State Amplifiers, Tom Thompson Re: [Amps] LDMOS Solid State Amplifiers, Gary Schafer Re: [Amps] LDMOS Solid State Amplifiers, Tom Thompson Re: [Amps] LDMOS Solid State Amplifiers, Bob Henderson Re: [Amps] LDMOS Solid State Amplifiers, Tom Thompson Re: [Amps] LDMOS Solid State Amplifiers, Joe Subich, W4TV Re: [Amps] LDMOS Solid State Amplifiers, Tom Thompson Re: [Amps] Tubes vs. Solid State, Manfred Mornhinweg [Amps] Tubes vs. Solid State, Jim Thomson <=

Previous by Date:	Re: [Amps] Tubes vs. Solid State, Bob Henderson
Next by Date:	Re: [Amps] Fwd: Re: soldering vs crimping, donroden
Previous by Thread:	Re: [Amps] Tubes vs. Solid State, Manfred Mornhinweg
Next by Thread:	[Amps] SWR increase on SB-220 input, Pete Smith N4ZR
Indexes:	[Date] [Thread] [Top] [All Lists]