And I dont see Freescale or others spending a lot of time and money on the
obsolete MF/HF bands.
----- Original Message -----
From: "Peter Voelpel" <df3kv@t-online.de>
To: <amps@contesting.com>
Sent: Sunday, July 29, 2012 10:55 PM
Subject: Re: [Amps] Dedicated RF
A pair of MRFE6VP61K25H does 1.8KW on 2m quite nicely with IMD3 better then
-40db.
On HF it´s a bit difficult to get them working as far I know.
73
Peter, DJ7WW
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of Jim Thomson
## To get good IMD3 out of that device... and I mean, like -40db below
one tone, 9-46 db pep)
it has to be severely de-rated. Run it in CB mode..and IMD goes to hell.
Its maybe a 400-500w pep out device
at best.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1424 / Virus Database: 2437/5164 - Release Date: 07/30/12
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|