ORIGINAL MESSAGE:
On Mon, 28 Jan 2013 13:33:50 -0800 (PST), NY1E wrote:
>
>I don't have a signal source outside the bands, but with an antenna analyzer
>connected to the output and a 2300 ohm resister from plate to ground, it will
>tune to 1.2:1 SWR on on the analyzer set to 3750. Is that the same test?
REPLY:
It is a little suspicious that the SWR will only go down to 1.2:1. It
should easily go to a perfect 1:1. Something's not right.
Bill, W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|