While I dont doubt that I see a large number of CB transformers and Im sure
a number of super power hams also. The giveaway that these are not for
commercial use is the single phase construction no matter what the kVA
except for 2 listed and one is for CB mobile use. He is also not shy about
it either and shows a photo.
The ICAS ratings vs weight is also interesting and even less than OEM in
Heath, Dentron, etc, and I do not see a Style description listed.
Carl
----- Original Message -----
From: "Paul Christensen" <w9ac@arrl.net>
To: <amps@contesting.com>
Sent: Monday, February 11, 2013 2:03 PM
Subject: Re: [Amps] Peter Dahl transformers
A few months ago, EPD was highly recommended to me by Reid Brandon when he
was still with Eimac.
Paul, W9AC
----- Original Message -----
From: "Coffey" <coffey@starfishnet.com>
To: <amps@contesting.com>
Sent: Sunday, February 10, 2013 3:04 PM
Subject: Re: [Amps] Peter Dahl transformers
Have no fear about Harbach not making transformers. My friend Peter
Eggimann has been making HV transformers since 1983 and has all the Dahl’s
data and specs from years ago. He has a nice manufacturing facility in
Wendell, N.C........EPD ....Electronic Products Design,
Inc......website: epd-inc.com. I was a customer before I retired and now
as a hobby amp builder.......Gary, K4AVC
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1430 / Virus Database: 2639/5596 - Release Date: 02/11/13
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|