Re: [Amps] Peter Dahl transformers

["Carl" <km1h@jeremy.mv.com>]

Yep, there is commercial CCS and ham/CB CCS; a big difference in weight and 
price.
There isnt a ham amp on the market that would survive commercial CCS at its 
power capability.
Carl
KM1H




----- Original Message ----- 
From: "Jeff Blaine" <keepwalking188@yahoo.com>
To: <amps@contesting.com>
Sent: Wednesday, February 13, 2013 2:42 PM
Subject: Re: [Amps] Peter Dahl transformers


> I had a custom done by EPD.  He will build exactly what you want.  You can 
> have complete control over the compromises and material set, if you know 
> what you want specifically.
> He told me once that most guys start out talking about CCS specs but when 
> the size and price come into focus, they start backing off from that.
> 73/jeff/ac0c
> www.ac0c.com
> alpha-charlie-zero-charlie
>
> -----Original Message----- 
> From: Carl
> Sent: Monday, February 11, 2013 8:17 PM
> To: Paul Christensen ; amps@contesting.com
> Subject: Re: [Amps] Peter Dahl transformers
>
> While I dont doubt that I see a large number of CB transformers and Im 
> sure
> a number of  super power hams also. The giveaway that these are not for
> commercial use is the single phase construction no matter what the kVA
> except for 2 listed and one is for CB mobile use. He is also not shy about
> it either and shows a photo.
>
> The ICAS ratings vs weight is also interesting and even less than OEM in
> Heath, Dentron, etc, and I do not see a Style description listed.
>
> Carl
>
>
>
>
> ----- Original Message ----- 
> From: "Paul Christensen" <w9ac@arrl.net>
> To: <amps@contesting.com>
> Sent: Monday, February 11, 2013 2:03 PM
> Subject: Re: [Amps] Peter Dahl transformers
>
>
> > A few months ago, EPD was highly recommended to me by Reid Brandon when he 
> > was still with Eimac.
> > Paul, W9AC
> >
> > ----- Original Message ----- 
> > From: "Coffey" <coffey@starfishnet.com>
> > To: <amps@contesting.com>
> > Sent: Sunday, February 10, 2013 3:04 PM
> > Subject: Re: [Amps] Peter Dahl transformers
> >
> >
> > > Have no fear about Harbach not making transformers.  My friend Peter 
> > > Eggimann has been making HV transformers since 1983 and has all the 
> > > Dahl’s data and specs from years  ago. He has a nice manufacturing 
> > > facility in Wendell, N.C........EPD    ....Electronic Products Design, 
> > > Inc......website: epd-inc.com. I was a customer before I retired and now 
> > > as a hobby amp builder.......Gary, K4AVC
> > > _______________________________________________
> > > Amps mailing list
> > > Amps@contesting.com
> > > http://lists.contesting.com/mailman/listinfo/amps
> > _______________________________________________
> > Amps mailing list
> > Amps@contesting.com
> > http://lists.contesting.com/mailman/listinfo/amps
> >
> >
> > -----
> > No virus found in this message.
> > Checked by AVG - www.avg.com
> > Version: 10.0.1430 / Virus Database: 2639/5596 - Release Date: 02/11/13
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1430 / Virus Database: 2639/5601 - Release Date: 02/13/13
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps