Re: [Amps] UHF Connectors

To:	Amps <amps@contesting.com>
Subject:	Re: [Amps] UHF Connectors
From:	Bill Turner <dezrat1242@yahoo.com>
Date:	Tue, 12 Nov 2013 13:19:31 -0800
List-post:	<amps@contesting.com">mailto:amps@contesting.com>

ORIGINAL MESSAGE:          (may be snipped)

On Tue, 12 Nov 2013 14:50:38 -0500, QRV wrote:

>Watch out for the UHF elbow adapters as well.  Some are so poorly made
>they may arc internally to the shell.

REPLY:

Good advice. I had a Radio Shack elbow blow once while running QRO and
damaged the load cap, a $300 repair bill. 

Amphenol only from then on. 

73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread]	Current Thread	[Next in Thread>
Re: [Amps] UHF Connectors, (continued) Re: [Amps] UHF Connectors, Roger (K8RI) Re: [Amps] UHF Connectors, Glen Zook Re: [Amps] UHF Connectors, qrv@kd4e.com Re: [Amps] UHF Connectors, Jim Brown Re: [Amps] UHF Connectors, Ian White Re: [Amps] UHF Connectors, Bill Turner Re: [Amps] UHF Connectors, Roger (K8RI) Re: [Amps] UHF Connectors, Paul Christensen Re: [Amps] UHF Connectors, Roger (K8RI) Re: [Amps] UHF Connectors, Paul Christensen Re: [Amps] UHF Connectors, Bill Turner <= Re: [Amps] UHF Connectors, Carl Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., Dr. David Kirkby Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., Roger (K8RI) Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., Carl [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good..*, Louis Parascondola* Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good..*, Carl* Message not available Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., Hardy Landskov Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., David Kirkby Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., Fuqua, Bill L Re: [Amps] "N, " "TNC" and "BNC" connectors are rated at 500 Watts and work at 1, 000 Watts as log as the load is good.., David Kirkby

Previous by Date:	Re: [Amps] UHF Connectors, peter chadwick
Next by Date:	Re: [Amps] UHF Connectors, Jim Brown
Previous by Thread:	Re: [Amps] UHF Connectors, Paul Christensen
Next by Thread:	Re: [Amps] UHF Connectors, Carl
Indexes:	[Date] [Thread] [Top] [All Lists]