On 22/07/15 04:00, amps-request@contesting.com wrote:
> I ask because I have a perfectly fine 'pole pig' transformer rated at 5
> KVA. 7200 AC volts on the output (reversed) is a bit much for my needs,
> so was wondering what the trade-off would be if it were run at
> considerably less than 220 input.
>
> I can see this is a better xformer for a 4cx10000, than anything I would
> be using, but I have what I have.
>
Usually the transformer is the difficult part. You can simply purchase
some tube, so build the easy part around the difficult part.
Buy that big tube. ;)
Steve
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|