Thanks to info from Manfred and a former coworker, I rewound a transformer. It
wasn't at all difficult, cost was a little over $100 for materials, and I have
a multitap transformer that can do easily over 4KVA. If I didn't already have
a NICE donor for a heavy iron transformer, I would've looked at going with a
switcher.
vy 73 es gl,Bryan WA7PRCPhotos + text: http://tinyurl.com/wa7prc-transformer
Date: Thu, 23 Jul 2015 14:09:11 +0000
From: Manfred Mornhinweg
To: amps@contesting.com
Subject: Re: [Amps] HV transformer and Variac
> Buy a 3KVA transformer from Heybour for $500.00 and be done with it. Small,
> compact, and it will work better.
Yes.
Or buy the materials and wind it yourself. It will be some work, but the cost
will be at most half that much, and you will learn something, and get the
satisfaction of having done it yourself.
Or make a switching power supply. It will be far more complex, you will have to
learn a lot of things, but the end result will be small, lightweight, and the
output will be precisely regulated, hum-free and short-circuit-proof.
Manfred
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|