Amps
[Top] [All Lists]

Re: [Amps] Ferrite Core for 160M PI Output ?

To: "Carl" <km1h@jeremy.qozzy.com>,<amps@contesting.com>
Subject: Re: [Amps] Ferrite Core for 160M PI Output ?
From: Paul Baldock <paul@paulbaldock.com>
Date: Mon, 12 Jun 2017 15:44:33 -0700
List-post: <mailto:amps@contesting.com>
I understand insulating between the wire and the core, but why do you need to insulate the two cores from each other?

At 12:02 PM 6/12/2017, you wrote:
Insulation.


----- Original Message ----- From: "Paul Baldock" <paul@paulbaldock.com>
To: "Carl" <km1h@jeremy.qozzy.com>; <amps@contesting.com>
Sent: Monday, June 12, 2017 3:01 PM
Subject: Re: [Amps] Ferrite Core for 160M PI Output ?


Why is it necessary to wrap the individual toroids before stacking?
How about Kapton Tape instead of Scotch 27?
- Paul
KW7Y
At 12:40 PM 6/11/2017, Carl wrote:

Dont forget to wrap each one with a layer of Scotch 27 HV tape and then wrap the stack before winding.

---
This email has been checked for viruses by AVG.
http://www.avg.com

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>