No, what he is saying is that you are not allowed to transmit more than 200
watts. Nothing to do with what the amp is capable of. It’s up to the operator
to follow the rules.
Also it refers to “transmitter power output,” regardless of antenna gain,
feedline loss, etc.
Vic 4X6GP
> On 6 Oct 2017, at 19:33, Tom Osborne <w7why1@gmail.com> wrote:
>
> Then what you are saying is that any amp capable of doing more than 1500
> watts should be illegal in the U.S. by those standards. 73
> Tom W7WHY
>
>>
>>
>>> On Fri, Oct 6, 2017 at 9:17 AM, Chris Hays <chris@chrishays.com> wrote:
>>>
>>> From part 97: (excerpt)
>>>
>>> §97.313 Transmitter power standards.
>>>
>>> ......
>>>
>>> (c) No station may transmit with a transmitter power output exceeding
>> 200 W
>>> PEP:
>>>
>>> (1) On the 10.10-10.15 MHz segment;
>>>
>>> ....
>>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|