----- Original Message -----
From: "Ron Notarius W3WN" <wn3vaw@verizon.net>
> A multiplier-hunting-only station on another band aside... I still say
> that
> those who employ electronic or mechanical means for a multi-transmitter
> lock
> out, so that only one signal is on the air at any given moment, is not a
> multi-single. How can it be, when 2 or more rigs are in use at any given
> moment under such a setup?
I note that no one has yet responded to the quiery about the 2 receiver
transceivers.
In my career in Amateur Radio, I was taught and have always heard that "rig"
referred to a transmitter, not the receiver.
I believe the wording of the rules refers to "transmitters", not rigs, not
receivers, not transceivers with dual receivers.
I believe the wording of the rules refers to "operators"; that is multiple
opertors and does NOT stipulate that only one at a time can be operating.
I am playing the Devil's advocate here, but why would you limit technology
and capability when the rules specifically state that "only one
transmitter"? Everyone knows this means TRANSMITTING.
Multiple operators means that multiple operators can be operating. It does
NOT limit their time nor does it limit their participation in any aspect of
the operation.
Only one transmitter, transmitting, at a time means just that!!!!!! The
rules do NOT say that you cannot have a dual receiver transceiver and the
main operator utilizing that receiver. Heck, even Single Ops UNassisted get
to do that.
The rules do NOT say that you cannot have two transceivers (TWO
TRANSMITTERS) and another operator manning the 2nd transceiver (or the 3rd).
Even Single Ops UNassisted get to use the 2nd and 3rd transmitters. They
just cannot have more than one transmitter transmitting at one time.
The rules for M/S say "one transmitter", and do NOT say anything about time
slicing (someone elses terminology) no more than they do for SO.
The rules say "multiple operators", and do NOT say that the "other ops" have
to put in ear plugs, go in the other room, go to sleep, take a walk, or fly
a kite. The rules say NOTHING about what the operators can do, with the
exception that they CANNOT PUT MORE THAN ONE TRANSMITTER ON THE AIR AT ANY
GIVEN INSTANCE!!!!!!
This is MULTIPLE operators/SINGLE transmitter.
There are many, many reasons why a group of operators might choose M/S
rather than M2 or M/M. As long as the operation does NOT violate the rules
of the M/S category, then the operation is M/S. Period.
There are very distinct differences between the classes. M2 allows two
transmitters transmitting SIMULTANEOUSLY on different bands. M/M allows at
least one transmitter transmitting on ALL bands SIMULTANEOUSLY.
And M/S, the subject of this thread, allows only ONE TRANSMITTER
transmitting ON ONE BAND at any given time, with exception of those contests
that allow a multiplier transmitter on another band. And that transmitter
is for MULTIPLIERS ONLY.
M/S and M2 also have the band change and time limitations which the M/M do
not have..
There is no way a M/S operation is even close to a M2 operation in terms of
TRANSMITTER ON THE AIR TIME.
So, let's not try to limit the M/S category to less than what is allowed for
even the Single Op UNassisted, in terms of transmitters. It is the
allowance of MULTIPLE OPERATORS and TRANSMITTERS TRANSMITTING that makes the
difference.
Mis dos centavos.
Milt, N5IA
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|