Multi single can be viewed either of two ways:
Single station where operators take turns in the chair. This can be one or
more transceivers.
Single station where only one transmitted signal is allowed. More than one
transceiver. This is where you can have a mult station and the 2nd operator
can look for mults. However only one signal can be transmitted at a time.
The difference between the former and the latter is probably what causes
controversy but I really don't see what the big deal is.
M/2 can have two stations transmitting simultaneously, CQing and mult
hunting. That is a huge step up from just having the 2nd op mult hunting.
73
Ria, N2RJ
On Mon, May 8, 2017 at 8:45 AM Gordon LaPoint <gordon.lapoint@gmail.com>
wrote:
> Mike,
> This is a great definition of Muti-Single and Multi-Two setup. I
> do lots of Multi Single and Multi Two operation in RTTY contests. There
> are two main reasons I use these modes, One is to get more of the local
> club members involved with contesting, and the other is I'm getting
> older and don't want to run 24 or 48 hours by my self!
> I hope that the contesting community does not do away with either
> mode, they provide many hours of fun, teaching and just good will for
> the hams that come to my, or their, station to do these contests!
> The Multi-Two setup is what got us using Bambi in the NAQP contests.
> Once upon a time it was allowed that each operator could use his "name"
> during the contest, causing much confusion for the other operators
> working us. (You were Charlie on 20 Mtr, now Gordon on 15, What???) We
> were operating from a Hunting camp in the Green Mountain National Forest
> in VT, so the next year we chose Bambi as a name, to eliminate the
> confusion of the stations working us. This added a lot of fun to the
> contest, and the Multi-Two mode made this all possible. We have had
> many operators at this station over the years, lots of fun!
> Thanks,
> Gordon - N1MGO
>
> On 05/05/2017 06:13 PM, W0MU Mike Fatchett wrote:
> > What does Multi Single mean to you?
> >
> > What does Multi-Two mean to you?
> >
> > What do these terms mean to the majority of contesters? Does anyone
> > know? Do the organizers know?
> >
> > Multi-Single to me and many that I have discussed this with, is one
> > rig and more than one person doing the operating. Simple. A bunch of
> > guys having fun around a radio. It might even include some beer! A
> > group of folks that may not want to operate the entire contest period
> > or have more fun in groups or where clubs can get together and have
> > fun. It is not a Multi Multi station reconfigured with a bunch of
> > interconnects and locks outs.
> >
> > Multi-two. Two radios and multiple operators. Same as above.
> > Simple. This allows a slightly bigger station to branch out and bring
> > in some more people.
> >
> > We already have a class for Lots of radios and operators it is called
> > Multi-Multi. Go knock yourselves out. Put 12 rigs on a band and
> > figure out how to adhere to the rules.
> >
> >
> >
> > _______________________________________________
> > CQ-Contest mailing list
> > CQ-Contest@contesting.com
> > http://lists.contesting.com/mailman/listinfo/cq-contest
>
>
> --
> Gordon - N1MGO
>
> _______________________________________________
> CQ-Contest mailing list
> CQ-Contest@contesting.com
> http://lists.contesting.com/mailman/listinfo/cq-contest
>
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|