Dennis,
The station is being built for M/S, M/2 and SO2R operation, including in-band.
So I'd answer your question with 'much of the time'.
73, David G3WGN M6O WJ6O
-----Original Message-----
From: Dennis Moore [mailto:dennis@mail4life.net]
Sent: 16 March 2019 04:48
To: cq-contest@contesting.com
Subject: Re: [CQ-Contest] Station Re-Build - Coax
How often will you be transmitting and receiving at the same time?
Dennis NJ6G
On 3/15/2019 10:29, David Aslin G3WGN wrote:
> Hi Frank,
> Thanks for saving me from a 'terrible practice'. I hadn't considered the
> potential for noise/signal injection via bundled cable screens, other than
> K9YC's fine work on keeping common mode currents out.
> The first 80m/250ft of my coax runs from the shack are in 4 inch conduit. I
> have laid 4 runs of conduit a couple of feet underground. I'm planning to
> put RX coax runs in one of the conduits, TX runs (Heliax) in two of the
> others and control cable in the 4th run. So RX runs will at best be 4-20 RG6
> cable diameters from the Heliax. Does that sound like enough separation from
> your experience?
> 73, David G3WGN M6O WJ6O
_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest
|