CQ-Contest
[Top] [All Lists]

Re: [CQ-Contest] Station Re-Build - Coax

To: cq-contest@contesting.com
Subject: Re: [CQ-Contest] Station Re-Build - Coax
From: donovanf@starpower.net
Date: Thu, 14 Mar 2019 18:53:42 -0400 (EDT)
List-post: <mailto:cq-contest@contesting.com>
Hi Alan, 


Your quotation from the Navy study omitted the important details 
described in the next few paragraphs. 


The context was multiple single shielded coaxial cables bundled 
with cables radiating interfering signals into the victim cables. 


Double shielding greatly reduces this problem but its also very 
effective if coaxial cables feeding microvolt signals to receivers are 
not bundled with cables carrying high level signals, a terrible 
practice. 


73 
Frank 
W3LPL 

----- Original Message -----

From: "Alan Higbie" <alan.higbie@gmail.com> 
To: cq-contest@contesting.com 
Sent: Thursday, March 14, 2019 2:59:07 PM 
Subject: [CQ-Contest] Station Re-Build - Coax 

Relevant to this discussion is an extensive study conducted by US Navy: 

THE MITIGATION OF RADIO NOISE AND INTERFERENCE FROM ON-SITE SOURCES 
at RADIO RECEIVING SITES (November 2009) by Wilbur R. Vincent, George F. 
Munsch, Richard W. Adler, Andrew A. Parker. (By the way, each of the 
study's authors is a ham.) 

The authors surveyed noise floor problems at 40 Navy receiving sites around 
the world. They drew on data from thee Navy's 
Signal-to-Noise-Enhancement-Project. 

They had many recommendations and conclusions. But the most relevant to 
the original question of this thread is this one: 

*"5.3 Cable Leakage* 
*Leakage of noise and other spectral components into RF cables running from 
antennas to receivers has been noted at all receiving sites that use 
single-shielded coaxial cables. Receiving sites using high-quality 
double-shielded coaxial cable and properly-assembled coaxial connectors 
seldom encounter cable-leakage problems." * 

I am currently in the midst of replacing my "single-shielded coax" with 
"high-quality double-shielded" RG400. 

I recently purchased 200 feet of Harbour Industries RG400 from Electro 
Enterprises, Inc. for $1.43 per foot. It came with certification as 
factory new MFG certificate. 

A link to the US Navy study can be found at: 
http://www.arrl.org/radio-frequency-interference-rfi 
(scroll down to bottom of page under heading Naval Postgraduate School RFI 
Handbooks) 

73, Alan K0AV 
alan.higbie@gmail.com 
_______________________________________________ 
CQ-Contest mailing list 
CQ-Contest@contesting.com 
http://lists.contesting.com/mailman/listinfo/cq-contest 

_______________________________________________
CQ-Contest mailing list
CQ-Contest@contesting.com
http://lists.contesting.com/mailman/listinfo/cq-contest

<Prev in Thread] Current Thread [Next in Thread>