Is this a case where CT isn't "smart enough" to figure out a backwards
spot ?
For example:
normal: DX de N5NJ: 7088.4 RW2F QSX 7188.4
backwards: DX de N5NJ: 7188.4 RW2F QSX 7088.4
I'm not sure this occurred, but I had no trouble with my TS850SAT on
numerous spots on 40m this past weekend.
Robert E. Naumann
N5NJ / V26O
N5NJ@arrl.net
www.qsl.net/n5nj
Plano, TX USA
ex KR2J, V26RN, W6V, WA2OVE
----- Original Message -----
From: Robert Doherty <k1vv@tmlp.com>
To: Gilmer, Mike <mgilmer@gnlp.com>; 'CT-USER'
<ct-user@contesting.com>
Sent: Monday, March 27, 2000 14:48
Subject: Re: [ct-user] QSX Reversed
>
> Mike,
>
> tnx .. K1TH also had it happen... 940...
> Ken said that possibly we were
> transmitting so it was reversed .. but when we were working the WPX
on
> Sunday it happened again on 40.. we had entered a DX call .. BUT
> momentarily keyed the transmitter .. a fraction of a second.. on
vox..
> cleared my throat .. then hit ALT-F3.. and it was reversed ... we
did NOT
> hit ALT-F3 while in transmit .. we hit ESC to clear the ALT-F3..
and then
> hit ALT-F3 again .. but it was still reversed .. we then tried to
> duplicate what happened with another call .... but could not do it
again
> ... we will try again this morning to see if we can reproduce what
happened
> ...
> Whitey K1VV
>
>
>
> "Gilmer, Mike" wrote:
>
> > If I dare say, this seems to be a Kenwood problem.
> > I posted at least two emails this month describing exactly this
and some
> > other manifestations of VFO problems. It seems to work "both
ways" (with CT
> > 9.48), that is, the 940 can send "bad" data to CT for ALT-F3
usage, and CT
> > (the bandmap/announce window) often sends "bad data" to the 940.
> >
> > I also posted info on this one year ago - so it's been a problem
for a
> > while.
> >
> > Another argument for "going solo" ;-)
> >
> > Mike N2MG
> >
> > On Sunday, March 26, 2000 9:39 AM, Robert Doherty
[SMTP:k1vv@tmlp.com]
> > wrote:
> > >
> > > WPX & CT9.49.008 ... TS-850
> > > After about six entries on 40 phone and posting the DX splits
correctly
> > > .. ALT-F3..
> > > the next one came up reversed ...like this.
> > >
> > > DX OE8SKQ 7213.0 QSX 7092.0
> > >
> > > Any one clicking on the band map would have ended up
transmitting out of
> > > the band.
> > > Has any one else had this problem?? We had it happen one time
before
> > > with
> > > CT9.48.
> > >
> > > Whitey K1VV
> > >
> >
> > --
> > Submissions: ct-user@contesting.com
> > Administrative requests: ct-user-REQUEST@contesting.com
> > WWW: http://www.k1ea.com/
> > Questions: owner-ct-user@contesting.com
>
>
> --
> Submissions: ct-user@contesting.com
> Administrative requests: ct-user-REQUEST@contesting.com
> WWW: http://www.k1ea.com/
> Questions: owner-ct-user@contesting.com
>
--
Submissions: ct-user@contesting.com
Administrative requests: ct-user-REQUEST@contesting.com
WWW: http://www.k1ea.com/
Questions: owner-ct-user@contesting.com
|