The same for my TS-940. It worked just fine on earlier versions.!!!
73, Ted K2QMF
On Wed, 29 Mar 2000 23:34:50 +0000 alsopb <alsopb@gloryroad.net> writes:
>
>This is plain wrong. The same rig (TS850) on earlier versions of the
>code had no problems. Something has changed in the coding.
>
>de Brian/K3KO
>
>Rob Kennedy wrote:
>>
>> To me, it sounds like some rigs (like the TS-940s) do not send
>correct
>> updated data to CT fast enough (especially after switching from
>transmit to
>> receive). It is a problem with the rig NOT CT.
>>
>> If you are experiencing problems, you may want to check with the
>> manufacturer of the rig to see if there is an updated EPROM
>available for
>> the rig. New rig firmware may solve the problem. The TS-940 was
>sold for
>> many years. I would be very surprised if Kenwood did not update the
>> firmware at least once.
>>
>> If updated firmware is not available (or if updated firmware does
>not solve
>> the problem), it sounds like you must wait a bit after switching to
>receive
>> before sending a SPOT. (Or just buy another rig - hi)
>>
>> 73's
>>
>> Rob
>>
>> >From: "Gilmer, Mike" <mgilmer@gnlp.com>
>> >Reply-To: "Gilmer, Mike" <mgilmer@gnlp.com>
>> >To: "'CT-USER'" <ct-user@contesting.com>
>> >Subject: RE: [ct-user] QSX Reversed
To: <ct-user@contesting.com>
>> >Date: Mon, 27 Mar 2000 10:05:18 -0500
>> >
>> >
>> > > Is this a case where CT isn't "smart enough" to figure out a
>backwards
>> > > spot ?
>> > >
>> > > For example:
>> > >
>> > > normal: DX de N5NJ: 7088.4 RW2F QSX
>7188.4
>> > > backwards: DX de N5NJ: 7188.4 RW2F QSX 7088.4
>> > >
>> >
>> >Well, "backwards" is relative. If, say, a European station spotted:
>> >
>> >DX 7188.4 N5NJ QSX 7088
>> >
>> >it might be correct! CT would then have to apply "out-of-band"
>rules to
>> the
>> >spotted callsign - which, of course, are different in different
>countries.
>> >Even then, if both of the frequencies were in-band (say DX 28045
>ZA1AAA
>> >28065), but were spotted "backwards", CT would be helpless.
>> >
>> >The data really needs to be correct as originated.
>> >
>> >73
>> >Mike
>> >
>> >--
>> >Submissions: ct-user@contesting.com
>> >Administrative requests: ct-user-REQUEST@contesting.com
>> >WWW: http://www.k1ea.com/
>> >Questions: owner-ct-user@contesting.com
>> >
>>
>> --
>> Submissions: ct-user@contesting.com
>> Administrative requests: ct-user-REQUEST@contesting.com
>> WWW: http://www.k1ea.com/
>> Questions: owner-ct-user@contesting.com
>
>--
>Submissions: ct-user@contesting.com
>Administrative requests: ct-user-REQUEST@contesting.com
>WWW: http://www.k1ea.com/
>Questions: owner-ct-user@contesting.com
>
________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
--
Submissions: ct-user@contesting.com
Administrative requests: ct-user-REQUEST@contesting.com
WWW: http://www.k1ea.com/
Questions: owner-ct-user@contesting.com
|