Karlnet
[Top] [All Lists]

RE: [Karlnet] PRISM II 100mW card and Karlnet TC V4.02

To: <karlnet@WISPNotes.com>
Subject: RE: [Karlnet] PRISM II 100mW card and Karlnet TC V4.02
From: "Tony " <tonylist@wwwbiz.com>
Reply-to: karlnet@WISPNotes.com
Date: Thu, 9 May 2002 11:39:51 -0400
List-post: <mailto:karlnet@WISPNotes.com>
Dong

You have this card! Its the one we sent you for testing :)

Sincerely
Tony Morella
Demarc Technology Group
Office: 908-996-7995
Cell: 908-246-9170
Fax: 908-847-0202
email: tony@demarctech.com
http://www.demarctech.com
Wireless Solution Provider
-----Original Message-----
From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]
On Behalf Of Support
Sent: Tuesday, May 07, 2002 1:18 PM
To: karlnet@WISPNotes.com
Subject: RE: [Karlnet] PRISM II 100mW card and Karlnet TC V4.02


Norm,

We see this problem with some of the higher power radios in the AP-1000
and the RG-1000.  Those pieces of hardware were made for the 32mW radios
and they will act funny with the 100mW and 200mW radios coming out. I
have not seen the radio you are using, but if you want to send one in
for testing we'd be glad to look at it for you.



<Prev in Thread] Current Thread [Next in Thread>