Karlnet
[Top] [All Lists]

RE: [Karlnet] 200mW cards in question

To: <karlnet@WISPNotes.com>
Subject: RE: [Karlnet] 200mW cards in question
From: "Charles Chia Sheng Wu" <cwu@cwlab.net>
Reply-to: karlnet@WISPNotes.com
Date: Wed, 22 May 2002 15:37:20 -0500
List-post: <mailto:karlnet@WISPNotes.com>
Don't want to jump in here, but Reggie @ KarlNet actually mentioned to me
that the Senoa cards (the ones you sent), we a little weak on output

-Charles

-----Original Message-----
From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]On
Behalf Of Tony
Sent: Wednesday, May 22, 2002 3:19 PM
To: karlnet@WISPNotes.com
Subject: RE: [Karlnet] 200mW cards in question


FYI

Just go off the phone with Karlnet test lab and to date they have not
tested the our cards for RF output, this is from they only two people
that would have done it.  Please specify your source of this
information.

Sincerely
Tony Morella
Demarc Technology Group
Office: 908-996-7995
Cell: 908-246-9170
Fax: 908-847-0202
email: tony@demarctech.com
http://www.demarctech.com
Wireless Solution Provider


-----Original Message-----
From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]
On Behalf Of Scott Stevens
Sent: Wednesday, May 22, 2002 10:25 AM
To: karlnet@WISPNotes.com
Subject: Re: [Karlnet] 200mW cards in question


On 5/21/02 11:18 PM, "Tony" <tonylist@wwwbiz.com> wrote:

> FYI our 100mW card at the connector is 19.7dBm
> http://www.demarctech.com/products/relia-wave-100mw-pcmcia-card.html
>

Not as per Karlnet.  Proposition of 17dbm.
What are you testing with?

--
Scott Stevens
800-815-4682
scott@scottstevens.net

orders@scottstevens.net
support@scottstevens.net
"Near cost Fridays!  Oh, and we buy cheap ;-) "



_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet

_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet


<Prev in Thread] Current Thread [Next in Thread>