Karlnet
[Top] [All Lists]

RE: [Karlnet] 200mW cards in question

To: <karlnet@WISPNotes.com>
Subject: RE: [Karlnet] 200mW cards in question
From: "Tony " <tonylist@wwwbiz.com>
Reply-to: karlnet@WISPNotes.com
Date: Wed, 22 May 2002 22:09:54 -0400
List-post: <mailto:karlnet@WISPNotes.com>
Scott

We are using connectors from Amphenol with Semi-ridge cable, we make and
test them in house. This allows for a very strong solder connection so
there is no movement on the internal solder connection. 

Sincerely
Tony Morella
Demarc Technology Group
Office: 908-996-7995
Cell: 908-246-9170
Fax: 908-847-0202
email: tony@demarctech.com
http://www.demarctech.com
Wireless Solution Provider


-----Original Message-----
From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]
On Behalf Of Scott Stevens
Sent: Wednesday, May 22, 2002 5:51 PM
To: karlnet@WISPNotes.com
Subject: Re: [Karlnet] 200mW cards in question


On 5/22/02 1:53 PM, "Tony" <tonylist@wwwbiz.com> wrote:

> Scott
> 
> We tested on channel one with a know good connector and card, using a 
> HP analyzer for testing. Using the Prism test util we put the card in 
> constant transmit mode.
> 
> I will tell you this we have see 1-2 db difference depending on what 
> cable and connector is used.
> 

So who's pigs do you suggest?

-- 
Scott Stevens
800-815-4682
scott@scottstevens.net

orders@scottstevens.net
support@scottstevens.net
"Always on E-Mail and 24/7 Support"



_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet


<Prev in Thread] Current Thread [Next in Thread>