Karlnet
[Top] [All Lists]

RE: [Karlnet] help - strange problem w/ v4.02 & 100mw cards

To: "'karlnet@WISPNotes.com'" <karlnet@WISPNotes.com>
Subject: RE: [Karlnet] help - strange problem w/ v4.02 & 100mw cards
From: Dan Metcalf <danm@suncorstainless.com>
Reply-to: karlnet@WISPNotes.com
Date: Sat, 15 Jun 2002 20:17:23 -0400
List-post: <mailto:karlnet@WISPNotes.com>
Was the card working ? was the link stable, it appears that this link is
100% solid

Dan Metcalf
Wireless Broadband Systems
dan.metcalf@wbsysnet.com
781-658-2075
www.wirelessbroadbandsystems.com

-----Original Message-----
From: Norm Young [mailto:npyoung@applegatebroadband.net]
Sent: Saturday, June 15, 2002 8:21 PM
To: karlnet@WISPNotes.com
Subject: Re: [Karlnet] help - strange problem w/ v4.02 & 100mw cards

Checked my notes, Dan, and I was seeing about a 20dB difference between
remote and local signals with the 100mW card loaded in the PtMP slot.

Norm

----- Original Message -----
From: "Norm Young" <npyoung@applegatebroadband.net>
To: <karlnet@WISPNotes.com>
Sent: Saturday, June 15, 2002 5:11 PM
Subject: Re: [Karlnet] help - strange problem w/ v4.02 & 100mw cards


> Oh yeah, that picture looks very familiar.  I'll check my notes to see if
> the asymmetry of 17 dB is about what I was seeing....
>
> Norm
>
> ----- Original Message -----
> From: "Dan Metcalf" <danm@suncorstainless.com>
> To: <karlnet@WISPNotes.com>
> Sent: Saturday, June 15, 2002 3:45 PM
> Subject: RE: [Karlnet] help - strange problem w/ v4.02 & 100mw cards
>
>
> > Here is a picture from the AP doing a wireless link test
> >
> > http://wirelessbroadbandsystems.hypermart.net/100mw.htm
> >
> >
> >
> > Dan Metcalf
> > Wireless Broadband Systems
> > dan.metcalf@wbsysnet.com
> > 781-658-2075
> > www.wirelessbroadbandsystems.com
> >
> > -----Original Message-----
> > From: Dan Metcalf [mailto:danm@suncorstainless.com]
> > Sent: Saturday, June 15, 2002 6:24 PM
> > To: 'karlnet@WISPNotes.com'
> > Subject: RE: [Karlnet] help - strange problem w/ v4.02 & 100mw cards
> >
> >
> > I just setup a cpe running Karlnet v4.02 and a 100mw card, the user is
> able
> > to access the internet and the speeds are great.
> >
> > However, there are two issue's, I can't ping/manage the unit from my
home
> > office and when I do signal stats it shows -94 signal on the cpe side,
> ( -60
> > at the ap).
> >
> > Anybody have any ideas? Our network is bridged ( for now ) and all the
> > cpe's/ap's are on a 192.168.x.x subnet while the pc's and routers are on
> > public ip's
> >
> > Dan Metcalf
> > Wireless Broadband Systems
> > dan.metcalf@wbsysnet.com
> > 781-658-2075
> > www.wirelessbroadbandsystems.com
> >
> >
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> > _______________________________________________
> > Karlnet mailing list
> > Karlnet@WISPNotes.com
> > http://lists.wispnotes.com/mailman/listinfo/karlnet
> >
> >
>
> _______________________________________________
> Karlnet mailing list
> Karlnet@WISPNotes.com
> http://lists.wispnotes.com/mailman/listinfo/karlnet
>
>

_______________________________________________
Karlnet mailing list
Karlnet@WISPNotes.com
http://lists.wispnotes.com/mailman/listinfo/karlnet

<Prev in Thread] Current Thread [Next in Thread>